Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 43 / 296

Chapter 2 Powering the Server Off and On 2-9
5. Go to the front of the Netra CT server and locate the system status panel (see
FIGURE 2-2
).
The locations of the system status panel in the Netra CT 810 server and Netra CT 410
server are illustrated in
FIGURE 2-2
.
6. Verify that the green power ( ) LEDs on the power supplies are blinking,
indicating that the system is in the standby mode.
FIGURE 2-3
shows the system power LED location for the Netra CT 810 server, and
FIGURE 2-4
shows the system power LED location for the Netra CT 410 server.
7. If you want to completely power off the Netra CT server, push the purple power
supply unit locking mechanisms up into the unlocked ( ) position (
FIGURE 2-1
).
Note – You must unlock the locking mechanism on both power supply units on the
Netra CT 810 server to completely power off the server.
The green power ( ) LEDs on the power supply units turn off (unlit), indicating
that the system is now completely powered off.