Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 270 / 296

B-4 Netra CT Server Service Manual • February 2007
B.2 To Use a Solaris Workstation
1. Get the appropriate cables and adapters and make the necessary connections.
You might need one or more cables and adapters to connect a Solaris workstation to
the server. The cables and adapters you need vary, depending on the server model
and the board that you are connecting to.
■
If you are connecting a Solaris workstation to a CPU board or rear transition module ,
use the information in
TABLE B-3
to make the necessary connections.
■
If you are connecting a Solaris workstation to an alarm card or alarm rear transition
module , use the information in
TABLE B-4
to make the necessary connections.
2. Check the
/etc/remote
file for the appropriate line.
To connect to the TTY A or COM 1 port on the workstation, check for:
TABLE B-3
Connecting a Solaris Workstation to a CPU Board or Rear Transition Module
Server
Type
TTY A Port on Netra CT Server Adapter Cable Adapter
Serial Port on
Workstation
Netra CT
810 server DB-9 male on the rear transition
module. See
Section A.2, “Host Rear
Transition Modules” on page A-23 .
Not
needed DB-9 female-to-DB-
25 male null modem Not
needed DB-25
female
Netra CT
410 server
DB-9 male on the rear transition
module. See
Section A.2, “Host Rear
Transition Modules” on page A-23 .
Not
needed DB-9 female-to-DB-
25 male null modem Not
needed DB-25
female
TABLE B-4
Connecting a Solaris Workstation to an Alarm Card or Alarm Rear Transition Module
Server
Type
COM 1 Port on Netra CT Server Adapter Cable Adapter
Serial Port on
Workstation
Netra
CT 810
server DB-9 male on the alarm rear transition
module. See
Section A.5, “Alarm Rear
Transition Module” on page A-52 .
Not needed DB-9 female-
to-DB-25 male
null modem Not
needed DB-25
female
Netra
CT 410
server
DB-9 male on the alarm rear transition
module. See
Section A.5, “Alarm Rear
Transition Module” on page A-52 .
Not needed DB-9 female-
to-DB-25 male
null modem Not
needed DB-25
female
tip -9600 /dev/ttya