Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 150 / 296

7-12 Netra CT Server Service Manual • February 2007
5. Verify that the removable media drive is deactivated.
As superuser, enter:
Output similar to the following is displayed:
The entry under the Type column for the drive you removed should be
unavailable
, and the entry under the Occupant column should be
unconfigured
.
Also, you can use the removable media module (RMM) LEDs on the system status
panel to verify that the removable media drive is deactivated. When the Okay to
Remove LED (
) on the system status panel for the removable media module is
ON, you can remove the removable media drive from the slot.
6. Attach the antistatic wrist strap.
See Section 1.2, “Attaching the Antistatic Wrist Strap” on page 1-2 .
7. If there is media in the drive, remove it.
8. Using a No. 2 Phillips screwdriver, loosen the captive screw that holds the
removeable media module in place.
9. Pull the module from the system and place it on an electrostatic discharge mat.
# cfgadm -a c0
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t6d0 unavailable connected unconfigured unknown
c0::rmt/0 unavailable connected unconfigured unknown