Sun Microsystems Netra CT 410, Руководство по обслуживанию

Страница: 141 / 296

Chapter 7 Removing and Replacing Hard Drives and Removeable Media 7-3
7.1.1 Removing a Hard Drive
Note – The instructions in this section do not cover unconfiguration procedures that
might be necessary if you are removing a hard drive that is under the control of any
disk management software, such as Solaris™ Volume Manager or Solstice
DiskSuite™. If you are running disk management software on your system, refer to
the documentation that came with the disk management software for instructions on
releasing a hard drive from the control of the software before proceeding with the
following instructions.
1. Log in to the server and obtain the attachment-point IDs for the hard drives
installed in your server.
As superuser, enter:
where c# is the SCSI controller number for the drive that you want to remove. For
example, to list the attachment-point IDs for the first SCSI chain in the server, as
superuser, enter:
Output similar to the following is displayed:
In the sample output, the attachment-point ID for the upper hard drive (HDD 0) is
c0::dsk/c0t0d0
and the attachment-point ID for the DVD drive is
c0::dsk/c0t6d0
.
# cfgadm -a c#
# cfgadm -a c0
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t6d0 CD-ROM connected configured unknown