Siemens SINUMERIK 828D Turning Скачать руководство пользователя страница 634

Страница: 634 / 940

Tool

To avoid collisions, use 5-axis transformation (software option) to define the position of the

tool tip during swiveling.
● Correct

The position of the tool tip is corrected during swiveling (tracking function).

● No correction

The position of the tool tip is not corrected (not tracked) during swiveling.

Machine manufacturer
Please observe the information provided by the machine manufacturer.

Swivel plane (only for G code programming)

● New

Previously active swivel frames and programmed frames are deleted. A new swivel frame

is formed according to the values specified in the input screen.

Every main program must begin with a swivel cycle with the new swivel plane, in order to

ensure that a swivel frame from another program is not active.

● Additive

The swivel frame is added to the swivel frame from the last swivel cycle.

If several swivel cycles are programmed in a program and programmable frames are also

active between them (e.g., AROT ATRANS), these are taken into account in the swivel

frame. If a swivel data set is activated that was not previously active, the swivel frames are

not deleted.

If the currently active work offset contains rotations, e.g., due to previous workpiece measuring

operations, they will be taken into account in the swivel cycle.

Swivel mode

Swiveling can either be realized axis-by-axis, using the angle in space, using the projection

angle or directly. The machine manufacturer determines when setting up the "Swivel plane/

swivel tool" function which swivel methods are available.

Machine manufacturer
Please refer to the machine manufacturer's specifications.

Programming technological functions (cycles)
10.6 Further cycles and functions

Milling

634

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Содержание SINUMERIK 828D Turning













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Похожие инструкции для SINUMERIK 828D Turning

Бренды по названию

Популярные бренды

Siemens SINUMERIK 828D Turning, Руководство по эксплуатации

Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Похожие инструкции для SINUMERIK 828D Turning

Бренды по названию

Популярные бренды