Siemens SINUMERIK 828D Turning Скачать руководство пользователя страница 853

Страница: 853 / 940

17.4

Teach-in via window

17.4.1

General

The cursor must be positioned on an empty line.
The windows for pasting program blocks contain input and output fields for the actual values

in the WCS. Depending on the default setting, selection fields with parameters for motion

behavior and motion transition are available.
When first selected, the input fields are empty unless axes were already traversed before the

window was selected.
All data from the input/output fields are transferred to the program via the "Accept" softkey.

Precondition

"AUTO" mode: The program to be edited is selected.

Procedure

Select the "Machine" operating area.

Press the <AUTO> or <MDA> key.

Press the <TEACH IN> key.

Press the "Teach prog." softkey.

Use the cursor and input keys to position the cursor at the desired point

in the program.
If an empty row is not available, insert one.

Press the softkeys "Rap. tra. G0", "Straight line G1", or Circ. interm. pos.

CIP" and "Circ. end pos. CIP".

The relevant windows with the input fields are displayed.

Traverse the axes to the relevant position.

Press the "Accept" softkey.
A new program block will be inserted at the cursor position.

Teaching in a program

17.4 Teach-in via window

Milling

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

853

Содержание SINUMERIK 828D Turning













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Похожие инструкции для SINUMERIK 828D Turning

Бренды по названию

Популярные бренды

Siemens SINUMERIK 828D Turning, Руководство по эксплуатации

Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Похожие инструкции для SINUMERIK 828D Turning

Бренды по названию

Популярные бренды