Siemens SINAMICS G120P, Руководство по эксплуатации

Страница: 77 / 496

Electrical installation
4.8 Signal connections
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
77
Motor temperature sensor interface
Table 4- 10 Motor temperature sensor interface
Pin Designation Technical data
14 T1 MOTOR Positive input for motor temperature sensor
Type: PTC, KTY sensor, Thermo-Click
15 T2 MOTOR Negative input for motor temperature sensor
Max. connectable cross-section: 1.5 mm²
Power supply
Table 4- 11 Power supply
Pin Designation
1)
Technical data
9 +24 V OUT Power supply output
24 VDC, max. 200 mA
28 GND Reference potential of the power supply/internal electronics ground
1 +10 V OUT Power supply output
10 VDC ±0.5 V, max. 10 mA
2 GND Reference potential of the power supply/internal electronics ground
31 +24 V IN Power supply input
18 ... 30 VDC, max. 1500 mA
32 GND IN Reference potential of the power supply input
35 +10 V OUT Power supply output
10 VDC ±0.5 V, max. 10 mA
36 GND Reference potential of the power supply/internal electronics ground
Max. connectable cross-section: 1.5 mm²
1)
GND: reference potential
X150 P1/P2 PROFINET interface
Table 4- 12 X150 P1 and X150 P2 PROFINET
Pin Signal name Technical data
1 RXP Receive data +
2 RXN Receive data -
3 TXP Transmit data +
4 Reserved, do not use
5 Reserved, do not use
6 TXN Transmit data -
7 Reserved, do not use
8 Reserved, do not use
Connector type: RJ45 socket
Cable type: PROFINET