Siemens SINAMICS G120P, Руководство по эксплуатации

Страница: 257 / 496

Operation
6.9 Communication over CANopen
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
257
6.9 Communication over CANopen
General information on CAN
You can find general information on CAN in the CAN Internet pages ( http://www.can-cia.org );
you can obtain an explanation of CAN terminology in the CANdictionary under CAN
downloads ( http://www.can-cia.org/index.php?id=6 ).
Integrating a inverter in a CANopen network
To integrate an inverter in a CANopen network, we recommend the EDS file on the Internet
( http://support.automation.siemens.com/WW/view/en/48351511 ). This file is the description
file of the SINAMICS G120 inverter for CANopen networks. In this way, you can use the
objects of the DSP 402 device profile.
6.9.1 CANopen functions of the converter
CANopen is a CAN-based communication protocol with linear topology that operates on the
basis of communication objects (COB).
There are two ways you can setup the communication between the inverter and the
controller:
● Via the Predefined connection set (Page 270)
● Via Free PDO mapping (Page 271)
Communication objects (COB)
The inverter operates with communication objects from the following profiles:
● CANopen communication profile CiA 301
● Device profile CiA 402 (Drives And Motion Control)
● Indicator profile DR 303-3
Specifically, these are:
● NMT Network management (NMT service) (Page 258)
Network management objects for controlling CANopen communication and for monitoring
the individual nodes on the basis of a master-slave relationship
● SDO SDO services (Page 261)
Service data objects for reading and changing parameters
● PDO PDO and PDO services (Page 266)
Process data objects to transfer process data; TPDO to send, RPDO to receive
● SYNC
Synchronization objects
● EMCY
Time stamp and fault messages