Siemens SINAMICS G120P, Руководство по эксплуатации

Страница: 210 / 496

Operation
6.7 Communication via EtherNet/IP
Inverter cabinet units
210
Operating Instructions, 12/2014, A5E32923362A
6.7.5 Supported objects
Ethernet/IP objects supported by the G120
Object class Object name Objects
required
ODVA
objects
SINAMICS
objects
hex dec
1 hex 1 Identity Object x
4 hex 4 Assembly Object x
6 hex 6 Connection Manager Object x
28 hex 30 Motor Data Object x
29 hex 31 Supervisor Object x
2A hex 42 Drive Object x
32C hex 44 Siemens Drive Object x
32D hex 45 Siemens Motor Data Object x
90 hex 144 Parameter Object x
91 hex 145 Parameter Object Free Access (DS47) x
F5 hex 245 TCP/IP Interface Object
1)
x
F6 hex 246 Ethernet Link Object
1)
x
401 hex … 43E hex 1025 … 1086 Parameter object x
1)
these objects are part of the Ethernet/IP system management.
ODVA AC/DC assembly
Number required/
optional
Type Name
hex dec
14 hex 20 Required Sending Basic Speed Control Output
15 hex 21 Optional Sending Extended Speed Control Output
16 hex 22 Optional Sending Speed and Torque Control Output
17 hex 23 Optional Sending Extended Speed and Torque Control Output
18 hex 24 Optional Sending Process Control Output
19 hex 25 Optional Sending Extended Process Control Output
46 hex 70 Required Receiving Basic Speed Control Input
47 hex 71 Optional Receiving Extended Speed Control Input
48 hex 72 Optional Receiving Speed and Torque Control Input
49 hex 73 Optional Receiving Extended Speed and Torque Control Input
4A hex 74 Optional Receiving Process Control Input
4B hex 75 Optional Receiving Extended Process Control Input