Siemens SINAMICS G120P, Руководство по эксплуатации

Страница: 124 / 496

Commissioning
5.2 Pre-assignment of inputs/outputs and wiring via p0015 macros
Inverter cabinet units
124
Operating Instructions, 12/2014, A5E32923362A
5.2 Pre-assignment of inputs/outputs and wiring via p0015 macros
Examples for (p0015) I/O preassignments macro
The following examples show the pre-assigned inputs and outputs defined automatically
depending on the macro that is selected during the initial commissioning. Because the
assignments of the inputs and outputs are specific for each Control Unit type, the following
information serves only as example. The inputs and outputs can be configured manually if no
suitable macro for the application can be found.
When selecting the macro, different macro designations are saved in the commissioning
tools (IOP, STARTER), which are juxtaposed in the following table:
Assignment of the macros to the designations in IOP and STARTER
Macro Name in the subsequent section Selection during commissioning via
the IOP
Selection during commissioning via
STARTER
--- No change
Macro 7 Automatic/local - changeover be-
tween fieldbus and jog mode
Conveyor with CDS selection 7.) Fieldbus with data set switch-
over
Macro 9 Motorized potentiometer Standard I/O with MOP 9.) Standard I/O with MOP
Macro 12 Setpoint via analog input Standard I/O with analog setpoint 12.) Standard I/O with analog set-
point
Macro 14 Process industry
PROFIBUS DP or PROFINET /
MOP fieldbus
Process I/O with fieldbus 14.) Process industry with fieldbus
Macro 15 Process industry analog setpoint /
MOP
Process I/O 15.) Process industry
Macro 17 Two-wire control, method 2 2-wire (forw/backw1) 17.) 2-wire (forw/backw1)
Macro 18 Two-wire control, method 3 2-wire (forw/backw2) 18.) 2-wire (forw/backw2)
Macro 19 Three-wire control, method 1 3-wire (enable/forw/backw) 19.) 3-wire (enable/forw/backw)
Macro 20 Three-wire control, method 2 3-wire (enable/start/dir) 20.) 3-wire (enable/on/reverse)
Macro 21 Communication with a higher-level
control via USS
USS fieldbus 21.) USS fieldbus
Macro 22 Communication with a higher-level
control via CANopen
CAN fieldbus 22.) CAN fieldbus