Siemens SIMATIC ET 200AL, Системное руководство

Страница: 1218 / 2255

Communications services
3.6 Secure Communication
Communication
Function Manual, 05/2021, A5E03735815-AJ
97
Requirement for the initial establishment of connection to load the CPU
• No password for confidential PLC configuration data available in the CPU.
If the CPU has already been loaded and therefore already has a password for confidential
PLC configuration data, this password must then match the project that is to be loaded.
• Project with CPU configuration (including password for confidential PLC configuration
data) and user program is available.
• The CPU is in STOP mode.
• Programming device and CPU are directly connected to each other and are located in a
protected environment; i.e. you can identify the CPU to be loaded and control the
connection between CPU and programming device.
Initial establishment of connetion to the CPU - provisioning phase
The first connection establishment for loading the CPU is secured by the TLS procedure in
terms of Secure PG/HMI Communication.
However, the CPU uses its manufacturer device certificate (if available) or a self-signed
certificate to establish this connection. The CPU can only be used to a limited extent in this
phase. In this phase, the CPU waits for the provision of the password-based key information -
or more simply stated, it is expecting the password for confidential PLC configuration data. In
the following, this phase is also called the provisioning phase. A message in the diagnostic
buffer indicates that the CPU is in the provisioning phase.