Siemens SIMATIC ET 200AL, Системное руководство

Страница: 1814 / 2255

Functions
5.10 Standard machine projects
PROFINET with STEP 7
Function Manual, 05/2021, A5E03444486-AL
249
Application examples
You can find application examples for configuration control at the device layer, configuration
control for IO systems and multiple-use IO systems on the Internet
( https://support.industry.siemens.com/cs/ww/en/view/29430270 ).
Additional information
For more information on multiple use IO systems, refer to section Multiple use IO systems
(Page 1).
For more information on the configuration control for IO systems, refer to section
Configuration control for IO systems (Page 1).
For more information on configuration control, refer to the system manual S7-1500,
ET 200MP ( http://support.automation.siemens.com/WW/view/en/59191792 ).
5.10.1 Multiple use IO systems
5.10.1.1 What you should know about multiple use IO systems
Multiple use automation solutions
For a flexible reusable automation solution as is the case with series machines, the following
use cases are typical:
•
The machine (and therefore also the PROFINET IO system) is used more than once by the
customers.
• The machine is used in different plants by various customers.
For this to be possible, the automation solution must meet the following requirements:
•
A project (configuration and program) can be loaded on various machines of the same
type without changes.
• Only a few easy adaptations need to be performed locally to integrate the machine into an
existing network infrastructure.