229
Instruction Manual
[ 명 칭 ]
서보OFF-브레이크 지령대기 시간
[표시메시지]
P508 SV-OFF BK DWL
【데이터단위】
10 ms
【데이터범위】
10 ~ 100
해 설
TYASKAWA 서보팩 파라미터 Pn508에 대응합니다.
Σ5
Pn621
Σ3
Pn604
[Name]
Servo OFF Brake Command Waiting Time
[Message]
P508 SV-OFF BK DWL
【Data Unit】
10 ms
【Input Range】 10 ~ 100
Description
This corresponds to the parameter Pn508 of the YASKAWA Servo Pack SGDV.
[ 명 칭 ]
순간정전 유지시간
[표시메시지]
P509 BLACKOUT HOLD
【데이터단위】
1 ms
【데이터범위】
20 ~ 1000
해 설
서보팩으로의 전원 전압공급이 순간 오프 된 경우 서보팩은 이것을 검출하고 서보 오프 합니다.
이때의 순간 오프시간을 설정합니다. 이 설정시간 이내에 있다면 운전을 그대로 속행하고
시간 이상이라면 서보오프 합니다. YASKAWA 서보팩 파라미터 Pn509에 대응합니다.
Σ5
Pn622
Σ3
Pn605
[Name]
Momentary Hold Time
[Message]
P509 BLACKOUT HOLD
【Data Unit】
1 ms
【Input Range】 20 ~ 1000
Description
The servo pack detects instantaneous power failure and conducts servo-off. This parameter
sets the instantaneous off time. If the blackout is shorter than this setting, operation is
continued. Otherwise, servo-off is executed.
This corresponds to the parameter Pn509 of the YASKAWA Servo Pack SGDV.
Σ3
Pn606
Σ5
Pn623
[ 명 칭 ]
입력신호 선택 1
[표시메시지]
P50A INPUT ALT1
【데이터단위】
hex
【데이터범위】
0000 ~ FFF1
해 설
서보ON신호와 하드웨어리밋트의 설정을 변경할 수 있습니다.( 틸팅제품의 경사축은 반드시 설정하여야 합
니다.)YASKAWA 서보팩 파라미터 Pn50A에 대응합니다.
[8101] : 표준설정값
2101 : 모터회전방향이 CW 이고 , 하드웨어 리밋트를 사용할 때 (Pn011=0 , Pn500=0011)
3101 : 모터회전방향이 CCW 이고 , 하드웨어 리밋트를 사용할 때 (Pn011=1 , Pn500=0010)
[Name]
Input Signal Selection 1
[Message]
P50A INPUT ALT1
【Data Unit】
hex
【Input Range】 0000 ~ FFF1
Description
You can change the setting of the servo motor ON signal, and setting of hardware limit.
(The inclination axle of the tilting product shall be set.)
This corresponds to the parameter Pn50A of the YASKAWA Servo Pack SGDV.
[8101] : Standard settings
2101 : When the motor rotation direction is CW, and hardware limit is used (Pn011=0 , Pn500=0011)
3101 : When the motor rotation direction is CCW, and hardware limit is used (Pn011=1 , Pn500=0010)
!
CAUTION
파라미터를 초기화 하면 8100으로 변경이 됩니다 틸팅제품의 경사축은 반드시 본 파라메타를 변경해야 합니다.
Initializing the parameter changes the parameter to 8100. The inclination axle of the tilting product shall change
this parameter.
Содержание NeoCon Series
