183
Instruction Manual
[Name]
RS232C Stop Bit
[Message]
RS232C STOP BIT
【Input Range】 0, 1
Description
This parameter defines the stop bit of the communication control.
【0】: 2 bit
1 : 1bit
!
CAUTION
이 파라미터를 유효하게 하려면 전원을 일단 차단할 필요가 있습니다.
※ 관련 파라미터 Pn227, Pn228, Pn229
※ Concerned Parameters : Pn227, Pn228, Pn229
To make this parameter effective, turn power off momentarily.
Σ3
Pn231
Σ5
Pn231
[ 명 칭 ]
전원투입시 서보 파라미터 체크 기능
[표시메시지]
SERVO PRM CHECK FUNC
【데이터범위】
0, 1, 2
해 설
컨트롤러의 전원투입 기동시에 실시하는 서보 파라미터 체크의 사양을 선택합니다.
【0】: 통지 있음/파라미터 체크 있음
전번의 전원 OFF시에 기억된 서보 파라미터 내용이 전원 투입시에 일치하고 있는지 체크합니다.
또한, 서보 파라미터 체크에 따라 일치하지 않는 장소가 있는 경우에는 전원 투입시의 기동화면에서
파라미터 번호를 통지하고, 기억하고 있는 서보 파라미터로 자동 수정합니다.
1 : 통지 없음/파라미터 체크 있음
전번의 전원 OFF시에 기억된 서보 파리미터 내용이 전원 투입시에 일치하고 있는지 체크합니다.
그러나 서보파라미터 체크에 따라 일치하지 않는 장소가 있는 경우에도 파라미터 번호를 통지하지
않고 기억하고 있는 서보 파라미터로 자동 수정합니다.
2 : 파라미터체크 없음
전원투입시의 서보 파라미터 체크를 하지 않습니다.
또한, 기억하고 있는 서보파라미터와 일치하지 않는 점도 수정하지 않습니다.
[Name]
Servo Parameter Check Function in Power ON
[Message]
SERVO PRM CHECK FUNC
【Input Range】 0, 1, 2
Description
This parameter selects the specification of the servo parameter check
function which is executed at the power on of the controller.
【0】: With notice and parameter check
The agreement of the servo parameter saved at the last power off with the present power
on. If any disagreement is identified, notify the parameter number on the start-up screen at the
power on, and automatically replace the error with the saved parameter.
1 : Without notice and with parameter check
The agreement of the servo paramete saved at the last power off with the present power on.
However, even if any disagreement is identified, the parameter number is not notified but
automatically replaced with the saved parameter.
2 : No parameter check
The servo parameters are not checked at power on. Difference from the saved servo
parameters is not corrected.
!
CAUTION
1. 이 파라미터를 유효하게 하려면 전원을 일단 차단할 필요가 있습니다.
2. 본 기능은 전원 OFF하면서부터 다음의 전원기동시 까지를 대상으로 하고 있고 전원 ON시의 서보파라미터 변경과는
관계없습니다
1. To make this parameter effective, turn power off momentarily.
2. This function applies from the power off to the next power on, and is not related with the servo parameter
change at power on.
Содержание NeoCon Series
