48
NeoCon Controller
[Pn002] 기계원점복귀의 속도는 고속속도로 실시합니다.
[Pn014] 기계원점복귀 방향을 선택합니다.
0 : CW방향
1 : CCW방향
[Pn015] 근거리 원점복귀방법을 선택합니다.
0 : 무효
1 : 유효
2 : 임의 위치지정형 근거귀리 유원효점 복
[Pn016] 임의 위치지정형 근거리 원점복귀의 경계가각 되도는위 치(기계좌표계)를 설정합니다.
[Pn002] Returns the table to the machine starting point (origin) at controlled speed.
[Pn014] Selects the direction of returning to the machine start point.
0 : CW direction
1 : CCW direction
[Pn015] Selects the near range start point returning method.
0 : Invalid
1 : Valid
2 : Arbitrary positioning type near range origin return is valid.
[Pn016] Sets the angle position (machine coordinates system) which is the boundary of the
arbitrary positioning type near range origin return.
관련 파라미터
Related
Parameter
START
Rotation
BLKFIN
ZRNFIN
Clamp
Unclamp
Timing Chart
타이밍차트
블록완료타이머
Pn032 (표준 설정값 : 500msec)
Block finish timer Pn032
(Standard setting value: 500msec)
Machine start point return
finish output (500 msec fixed)
기계원점복귀 완료출력 (500msec고정)
For Pn032=0, BLKFIN
at the start OFF.
기계원점복귀 완료출력
(500msec고정)
4.5.10 G24 (가공원점복귀)
4.5.10 G24 (Process Start Point Return)
G24에 의한 가공좌표계의 원점위치로 회전합니다. 이것을 가공원점복귀라고 합니다.
가공원점복귀의 동작은 Pn002의 고속속도로 회전합니다.
가공원점복귀가 완료한 때에는 가공원점위치확인(360FIN), 블록완료(BLKFIN)의 출력신호를 출력합니다.
가공원점복귀 방향은 Pn014에서 설정되지만 Pn015의 근거리 원점복귀의 설정이 되어 있는 경우에는 Pn015의 설정이 우선됩니다. 가공원
점복귀 위치에서 G24 지령을 한 경우도 다시 가공원점복귀 동작을 하지않고 블록완료(BLKFIN), 가공원점복귀확인(360FIN)를 출력합니다.
Rotates to the origin of the process coordinate system by G24. This is called ‘process start point return.
The returning to the process origin is made at the rotation speed controlled by Pn002. When this return
has been completed, the output signals of process start point check (360FIN) and block finish (BLKFIN) are generated. The direction
of process start point return is set up by Pn014. However, if the Pn015 near range start point return setting has been made, the set-
ting of the Pn015 has the priority. Also, when G24 command has been executed at the process start point return position, BLKFIN
and 360FIN are outputted after repeating the process start point return operation.
Содержание NeoCon Series
