173
Instruction Manual
MZERO POS
MAX SIDE
(Pn102)
MIN SIDE
(Pn101)
OPERABLE
AREA
MZERO POS
MIN SIDE
(Pn101)
MAX SIDE
(Pn102)
OPERABLE
AREA
Pn101=270.000, Pn102=90.000
Pn101=270.000, Pn102=90.000
!
CAUTION
1. 소프트웨어 리미트는 기계원점복귀 완료후가 아니면 유효하지 않습니다.
2. CW 방향에 대한 동작중 또는 동작전에 체크에서 걸린 경우에는
『Err.111 SOFTWARE LIMIT+(소프트웨어 리미트+측)』가 발생합니다.
3. CCW 방향에 대한 동작중 또는 동작전에 체크에서 걸린 경우에는
『Err.112 SOFTWARE LIMIT-(소프트웨어 리미트-측)』가 발생합니다.
4. 상기 Pn101=90.000, Pn102=270.000과 같은 설정은 가능하지만 기계원점복귀
완료 후에는 어느 방향으로 동작하여도 알람이 발생합니다.
1. Software limit is effective only after returning to the machine start point (origin).
2. If checked during or before the movement towards plus direction,
「Err.111 SOFT WARE LIMIT+ (software limit + side)」is generated.
3. If checked during or before the movement towards minus direction,
「Err.112 SOFT WARE LIMIT- (software limit - side)」is generated.
4. Although above Pn101=90.000 or Pn102=270.000 setting is possible, however after returning to
the machine start point, movement in any direction will trigger an alarm.
Σ3
Pn103
Σ5
Pn103
[ 명 칭 ]
일방향 위치결정 사양
[표시메시지]
UNIDIRECTIONAL SPEC
【데이터범위】
0, 1, 2
해 설
프로그램 운전시의 위치결정을 어느 방향에서 위치결정할지 설정합니다.
【0】: 무효
1 : +방향위치결정
플러스방향에서는 통상 종류의 위치결정을 하고 마이너스 방향에서의 위치결정의 경우는
한번 지령위치를 통과한 후(통과각도 : Pn104) 플러스 방향으로 반전하고 지령위치로 접근 합니다.
2 : -방향위치결정
마이너스방향에서는 통상 종류의 위치결정을 하고 플러스방향에서의 위치결정의 경우는
한번 지령위치를 통과한 후(통과각도 : Pn104) 마이너스 방향으로 반전하고 지령위치로 접근 합니다.
[Name]
Unidirectional Positioning Spec.
[Message]
UNIDIRECTIONAL SPEC
【Input Range】 0, 1, 2
Description
This defines the direction of the positioning in program operation.
【0】: Invalid
1 : + Direction
In plus direction, normal type positioning is conducted.
In minus direction, pass over the reference position once (passing angle: Pn104),
turn back to plus direction and approach the reference position.
2 : - Direction
In minus direction, normal type positioning is conducted.
In plus direction, pass over the reference position once (passing angle: Pn104),
turn back to minus direction and approach the reference position.
Содержание NeoCon Series
