148
NeoCon Controller
!
CAUTION
1. Pn015=1, 2의 경우에는 Pn014의 기계원점복귀방향은 무효입니다. 그 때문에 원점복귀방향에 의해
위치결정의 오차가발생하므로 Pn103, Pn104의 일방향 위치결정의 사용을 권합니다.
For Pn015=1, 2 the machine origin return direction of Pn014 is invalid. Therefore, error occurs in the positioning
due to the returning direction. It is recommended to use the unidirectional positioning of Pn103, Pn104.
※ 관련 파라미터 Pn014, Pn016
※ Concerned Parameters : Pn014, Pn016
WZERO
WZERO
WZERO
WZERO
WZERO
가공원점복귀방향(Pn014설정값은 무관계이다.)
Direction of returning to the machine start point
설정값
Set Value
Pn015=0
Pn015=1
Pn015=2, Pn016=90.000
개시위치
Start
Point
위치와는 무관계
Not related
with position
가공좌표계 179.999°이하
Process
coordinate system
179,999° or less
가공좌표계 180.000°이상
Process
coordinate system
180,000° or above
가공좌표계 89.999°이하
Process
coordinate system
89,999° or less
가공좌표계 90.000°이상
Process
coordinate system
90,000° or above
전방향
All
Directions
REV.DIR BNDR'
(Pn016=90.000)
REV.DIR BNDR'
(Pn016=90.000)
!
CAUTION
1. If Pn015=2 is not set, angle setting is invalid.
2. The object of the arbitrary angle is machine coordinates system for machine origin return or
process origin return for process origin return.
1. Pn015=2로 설정을 하지 않은 경우에는 각도설정을 했어도 무효입니다.
2. 임의각도의 대상은 기계원점 복귀시에는 기계좌표계, 가공원점복귀시에는 가공좌표계입니다.
※ 관련 파라미터 Pn015
※ Concerned Parameters : Pn015
[Name]
Optional Angle Assignment in Short Cut Return Direction
[Message]
ZRN DIR OPT POS
【Data Unit】
deg
【Input Range】 0.000 ~ 359.999
Description
Define the direction of returning to the origin, with an arbitrary angle as the boundary.
If Pn016>(present stop position), the returning direction is CCW. If Pn016≤(present stop position),
the returning direction is CW. Here, the CW is considered as the plus direction.
※ Refer to the direction of machine and process origin return of the Pn015.
Σ3
Pn016
Σ5
Pn016
[ 명 칭 ]
근거리 복귀방향 임의각도지정
[표시메시지]
ZRN DIR OPT POS
【데이터단위】
deg
【데이터범위】
0.000 ~ 359.999
해 설
임의각도를 경계선으로 하고 원점복귀의 회전방향을 결정합니다.
Pn016 > 현재 정지위치의 경우 원점복귀방향은 CCW입니다.
Pn016 ≤ 현재 정지위치의 경우 원점복귀방향은 CW입니다.
단, 이 회전방향은 CW회전을 플러스 방향으로 한 경우의 설명입니다.
※ Pn015의 기계원점복귀, 가공원점복귀 회전방향 참조
Содержание NeoCon Series
