Ross Synergy 1, Руководство по обслуживанию

Страница: 38 / 240

2–14 • System Architecture Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)
Reference
The simplest mode is when the Deserializer is used for the reference. The microprocessor tells the
module to add a delay of [n] clocks. The signal comes in — it is then delayed and fed out.
• On all other buses (e.g., MLE, Aux Buses) system software requests a delay of [n]
clocks from the reference.
The reference sends a sync pulse, then the module looks at
incoming video and adjusts the delay dynamically — delaying video by [n] from the
reference signal.
System delay on the Synergy 1 is adjusted using the Reference Menu . Refer to the section,
“ Reference Delay Adjustment ” in the Synergy 1 Installation Guide for more information.
Synergy 1 Reference Menu
System delay on the Synergy 100 is adjusted using the Outputs Menu . Refer to the section, “ Outputs
Menu ” in the Synergy 100 Installation Guide for more information.
Synergy 100 Reference Menu
The output of the Deserializer Module is routed to the SPG, that in turn generates Horizontal Sync,
Vertical Sync and Field Pulse.
Outputs
0. Aspect
1. Ref Dly 4:3
300
MENU
Exit 100
Previous SEL
Accept 10
Down
1
Up
2. Clean BeforeKeys
3. Ancillary data
4. RemAuxPrg Off
5. Fld Dom Field1