Ross Synergy 1, Руководство по обслуживанию

Страница: 18 / 240

1–2 • Introduction Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)
About This Guide
This guide provides information regarding the technical theory and maintenance of the following
Synergy switchers:
• Synergy 1
• Synergy 100
The following chapters are included:
• Chapter 1 — “ Introduction ” summarizes the guide and lists important terms,
conventions and abbreviations.
• Chapter 2 — “ System Architecture ” describes the switcher’s block diagram, and
explains how video flows through the unit.
• Chapter 3 — “ Software Upgrades ” provides instructions for performing software
upgrades.
• Chapter 4 — “ Option Boards ” provides basic information about the optional boards:
Serializers and Deserializers for timing Aux Buses, the Dual/Floating Border Generator,
the Squeeze & Tease Boards, the Ultimatte Insider Board, the Dual Aspectizer Board,
and the Frame Tally Board.
• Chapter 5 — “ Frame Processor (CPU) Board ” provides details on the Frame CPU
Board. The Serializer and Deserializer Boards and their installation are also discussed.
• Chapter 6 — “ Working with Installed Options ” discusses the system menus that
enable you to verify the installed options on your Synergy switcher, and install serial
numbers and software options.
• Chapter 7 — “ DVE Send Option ” outlines the procedures required to install and test
the DVE Send Option on the Synergy 1 switcher.
• Chapter 8 — “ Power Supplies ” provides information about redundant power, and
procedures for changing control panel and frame power supplies in the field.
• Chapter 9 — “ Calibration and Diagnostics ” provides information about calibrating the
Synergy 1 and Synergy 100 switchers, and running a variety of diagnostic tests.
• Chapter 10 — “ Control Panel Boards ” provides details about each “switch” board in
the control panel for the Synergy 1 and Synergy 100 switchers, plus the Control Panel
CPU Board layout for each.
• Chapter 11 — “ Synergy 1 Panel Maintenance ” provides detailed instructions for basic
Synergy 1 control panel maintenance procedures, such as changing lamps and buttons.
• Chapter 12 — “ Synergy 1 Control Panel Options ” provides instructions for installing a
variety of control panel options, including VTR Remote Control, Video Server Control
and Audio Server Control.
• Chapter 13 — “ Miscellaneous Options ” provides instructions for installing the Editor
Interface Option and the Synergy 1 USB Controller.
• An Index is also provided for your reference.
If, at any time, you have a question pertaining to your Synergy 1 or Synergy 100 switcher, please
contact us at the numbers listed in the front of this guide. Our technical staff are always available for
consultation, training, or service.