Ross Synergy 1, Руководство по обслуживанию

Страница: 116 / 240

6–8 • Working with Installed Options Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)
Storing and Recalling Option Codes – Synergy 1
The Installed Options Menu 2-2 allows you to store and recall your option codes to a storage device,
such as a floppy disk or USB key, for purposes of safe storage.
Storing Option Codes
Use the following procedure to store option codes to a storage device:
1. Navigate to the Installed Options Menu 1-2 as follows:
• Press
HOME
(to display the Main Menu 1-2 ).
•
MORE
(to display the Main Menu 2-2 ).
•
Setup
(to display the Setup Menu ).
•
Installed Options
(to display the Installed Options Menu 1-2 ).
2. Press
MORE
to display Installed Options Menu 2-2 .
Installed Options Menu 2-2
3. Insert a storage device into the Synergy 1 switcher as follows:
• Insert a pre-formatted 1.4 MB high-density floppy disk into the floppy disk drive of
the Synergy 1 switcher.
OR
• Insert a USB key into the USB port of the Synergy 1 switcher. You must wait 5
seconds after inserting the USB key into the USB port before you can store option
codes to it.
4. Press Store Codes to Disk to store all of your option codes.
Note
You must have the USB Removable Media Drive option installed in
order to use a USB key for storing and recalling option codes on the
Synergy 1 switcher.
Caution Do NOT remove the floppy disk or USB key from the switcher before
the LED on the disk drive or USB port goes out. Doing so may destroy
the data on your floppy disk or USB key, as well as the data on the next
one you insert into the switcher.