Ross Synergy 1, Руководство по обслуживанию

Страница: 226 / 240

13–16 • Miscellaneous Options Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)
6. Make a twisted fold to change the cable’s direction by 90 degrees as shown below.
Immediately, make another twisted fold to change the cables direction by 90 degrees and
run it toward socket
J1
on Board 4216A-034 .
Running the Data Cable to Board 4216A-034
7. Run the data cable over socket J1 on Board 4216A-034 and plug the next header into it,
securing the latches around the header (see diagram below).
Finishing the Data Cable Installation
8. Make a twisted fold to change the cable’s direction by 90 degrees and run the cable
toward the final socket labeled J1 on Board 4216A-030 .
9. Plug the last cable header into the socket and secure the latches.
This completes the procedure for installing the USB cable.
E
J1
4216A-035
USB Controller
J1
From 4216A-036
To
4216A-034
F
J1
J1
4216A-034
4216A-030
From 4216A-035