Ross Synergy 1, Руководство по обслуживанию

Страница: 183 / 240

Synergy 1 and Synergy 100 Maintenance Guide (v16) Control Panel Boards • 10–11
Synergy 100 Rear Panel Connectors
The figure below illustrates the rear panel’s connector section. All connectors are always present,
whether or not you have options installed. In the Synergy 100 Installation Guide , refer to Appendix
A, “ Specifications ” for a list of all control panel pinouts.
Synergy 100 Control Panel — Rear View, Connector Section
1. Power
One DC connector is provided to supply power to the control panel.
2. Analog Connector
One 50-pin connector labeled
ANALOG
is provided for those users who wish to use
their existing Ross RVS-210 or Ross RVS-216 control cable to connect their Synergy
100 panel to the frame.
3. 100/110 Connector
One 15-pin “D” connector labeled
100/110
is provided for those users who wish to use
their existing GVG 100/110 control cable to connect their Synergy 100 panel to the
frame.
4. Synergy Connector
One 8-pin shielded Telco connector labeled
SYNERGY
is provided for those users who
wish to use a Telco control cable (supplied) to connect their Synergy 100 panel to the
frame.
5. Tally Connectors
Two 12-pin connectors labeled
TALLY 1
and
TALLY 2
are provided for a total of 16
standard panel tally relays.
1) Power 3) 100/110 Connector 5) Tally Connectors
2) Analog Connector 4) Synergy Connector
A
NALOG
100/110
S
YNERGY
T
ALLY
1 T
ALLY
2
12V__
4A -----
ROSS VIDEO LIMITED
MADE IN CANADA
Synergy 100
THIS CLASS A DEVICE COMPLIES WITH CANADIA
ICES-003 AND PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS:
(1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE
AND,
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
R
1 2 3 4 5