Ross Synergy 1, Руководство по обслуживанию

Страница: 150 / 240

9–8 • Calibration and Diagnostics Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)
3. Press
Errors
to display a list of Errors .
Information Menu — Errors Display
4. View information for the Synergy 1 panel and frame as follows:
• Use the top
Panel
knob to scroll through a list of individual panel ports, with the
communication errors for the selected port shown in the main area of the display. If
Total Errors
is selected, the information displayed includes all communication
errors for the entire panel.
• Use the middle
Frame
knob to scroll through a list of individual frame ports, with
the communication errors for the selected port shown in the main area of the
display. If
Total Errors
is selected, the information displayed includes all
communication errors for the entire frame.
5. Press
Reset Count
to manually reset the error counts. Please note, however, that all
counts are automatically reset on power up.
This completes the procedure to display panel information.
Potentiometer Test
The Pots Test Menu allows you to test the response of all knobs on the Synergy 1 control panel.
Use the following procedure to test the potentiometers:
1. Navigate to the Panel Diagnostics Menu 1-2 as follows:
• Press HOME (to display the Main Menu 1-2 )
• MORE (to display Main Menu 2-2 )
• Setup (to display the Setup Menu )
• Panel Diagnostics (to display Panel Diagnostics Menu 1-2 )
2. Press Pots Test to display the Pots Test Menu .
Pots Test Menu