manualshive.com logo in svg

Ross Synergy 1, Руководство по обслуживанию

Поделиться
Скачать
Ross Synergy 1 Скачать руководство пользователя страница 167

Synergy 1 and Synergy 100 Maintenance Guide (v16-S1)

Calibration and Diagnostics • 9–25

4. Press and hold down the following three buttons to exit the panel Diagnostic Mode:

•

SEL

 in the 

Effects Control

 

Group

•

SEL

 in the 

Mattes

 

Group

•

SEL

 in the 

System Control

 

Group

This completes the procedure to test the potentiometers on the Synergy 100 panel. If you are unsure 
about the results of the test, or think that the results are incorrect, contact Ross Video Technical 
Support.

Fader Test

The 

Fader Test 

allows you to test the MLE fader on the Synergy 100 panel. 

Use the following procedure to test the fader. 

1. Press and hold down the following three buttons at once:

•

SEL

 in the 

Effects Control

 

Group

•

SEL

 in the 

Mattes

 

Group

•

SEL

 in the 

System Control

 

Group

A message will scroll across the 3 four-character displays in the 

Effects Control

, 

Mattes

, and 

System Control

 groups. The message advises you that the control panel is 

in Diagnostic Mode. This message will continue to scroll until a knob, button, the fader, 
or the joystick is disturbed.

2. Test the fader on the Synergy 100 control panel as follows:

•

Move the fader to the upper stop. The zinger next to the fader will increase until all 
of the segments are lit.

•

Move the fader to the lower stop. The zinger next to the fader will decrease until 
none of the segments are lit.

3. Verify the information that is displayed in the 3 four-character displays as follows:

•

In  the 

Effects Control

 

Group

, 

Fadr 

appears in the display.

•

In  the 

Mattes

 

Group

, a range of numerical values appears in the display.

•

In  the 

System Control

 

Group

, 

Fadr

 appears in the display.

•

In addition, the LEDs in the 

Transition Progress Bar

 will light.

4. Press and hold down the following three buttons to exit the panel Diagnostic Mode:

•

SEL

 in the 

Effects Control

 

Group

•

SEL

 in the 

Mattes

 

Group

•

SEL

 in the 

System Control

 

Group

This completes the procedure to test the fader on the Synergy 100 control panel. If you are unsure 
about the results of the test, or think that the results are incorrect, contact Ross Video Technical 
Support. 

Содержание Synergy 1

















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды