Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 201 / 388

Installing under z/VM
183
•
root= file-system
where
file-system
represents the device on which the root file system can be found. For
installation purposes, it should be set to
/dev/ram0
, which is the ramdisk containing the Red Hat
Enterprise Linux installation program.
The following parameters are required to set up networking:
•
SUBCHANNELS=
Provides required device bus IDs for the various network interfaces.
qeth: SUBCHANNELS="read_device_bus_id,write_device_bus_id, data_device_bus_id"
lcs: SUBCHANNELS="read_device_bus_id,write_device_bus_id"
For example (a sample qeth SUBCHANNEL statement):
SUBCHANNELS=0.0.0600,0.0.0601,0.0.0602
The following parameters are optional:
•
HOSTNAME= string
Where
string
is the hostname of the newly-installed Linux guest.
•
NETTYPE= type
Where
type
must be one of the following:
lcs
, or
qeth
.
Choose
lcs
for:
• OSA-2 Ethernet/Token Ring
• OSA-Express Fast Ethernet in non-QDIO mode
• OSA-Express High Speed Token Ring in non-QDIO mode
• Gigabit Ethernet in non-QDIO mode
Choose
qeth
for:
• OSA-Express Fast Ethernet
• Gigabit Ethernet (including 1000Base-T)
• High Speed Token Ring
• HiperSockets
• ATM (running Ethernet LAN emulation)
•
IPADDR= IP
Where
IP
is the IP address of the new Linux guest.
•
NETWORK= network
Where
network
is the address of your network.