Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 79 / 388

Installing Packages
61
4.26. Installing Packages
At this point there is nothing left for you to do until all the packages have been installed. How quickly
this happens depends on the number of packages you have selected and your computer's speed.
4.27. Installation Complete
Congratulations! Your Red Hat Enterprise Linux installation is now complete!
The installation program prompts you to prepare your system for reboot. Remember to remove any
installation media if it is not ejected automatically upon reboot.
After your computer's normal power-up sequence has completed, the graphical boot loader prompt
appears at which you can do any of the following things:
• Press
Enter
— causes the default boot entry to be booted.
• Select a boot label, followed by
Enter
— causes the boot loader to boot the operating system
corresponding to the boot label.
• Do nothing — after the boot loader's timeout period, (by default, five seconds) the boot loader
automatically boots the default boot entry.
Do whatever is appropriate to boot Red Hat Enterprise Linux. One or more screens of messages
should scroll by. Eventually, a
login:
prompt or a GUI login screen (if you installed the X Window
System and chose to start X automatically) appears.
The first time you start your Red Hat Enterprise Linux system in run level 5 (the graphical run level),
the
Setup Agent
is presented, which guides you through the Red Hat Enterprise Linux configuration.
Using this tool, you can set your system time and date, install software, register your machine with
Red Hat Network, and more. The
Setup Agent
lets you configure your environment at the beginning,
so that you can get started using your Red Hat Enterprise Linux system quickly.
For information on registering your Red Hat Enterprise Linux subscription, refer to
Chapter 25,
Activate Your Subscription
.
4.28. Itanium Systems — Booting Your Machine and Post-
Installation Setup
This section describes how to boot your Itanium into Red Hat Enterprise Linux and how to set your
EFI console variables so that Red Hat Enterprise Linux is automatically booted when the machine is
powered on.
After you reboot your system at the end of the installation program, type the following command to
boot into Red Hat Enterprise Linux:
elilo
After you type
elilo
, the default kernel listed in the
/boot/efi/elilo.conf
configuration file is
loaded. (The first kernel listed in the file is the default.)
If you want to load a different kernel, type the label name of the kernel from the file
/boot/efi/
elilo.conf
after the
elilo
command. For example, to load the kernel named
linux
, type: