Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 161 / 388

Network Configuration
143
Figure 12.20. Editing a Network Device
Note
Do not use the numbers as seen in this sample configuration. These values will not work
for your own network configuration. If you are not sure what values to enter, contact your
network administrator for assistance.
If you have a hostname (fully qualified domain name) for the network device, you can choose to have
DHCP (Dynamic Host Configuration Protocol) automatically detect it or you can manually enter the
hostname in the field provided.
Finally, if you entered the IP and Netmask information manually, you may also enter the Gateway
address and the Primary and Secondary DNS addresses.
Note
To change your network configuration after you have completed the installation, use the
Network Administration Tool
.
Type the
system-config-network
command in a shell prompt to launch the
Network
Administration Tool
. If you are not root, it prompts you for the root password to continue.