Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 40 / 388

Chapter 4. Installing on Intel
®
and AMD Systems
22
Note
Refer to
Chapter 8, Additional Boot Options for Intel
®
and AMD Systems
for additional
boot options not covered in this section.
• To perform a text mode installation, at the installation boot prompt, type:
linux text
• ISO images have an md5sum embedded in them. To test the checksum integrity of an ISO image, at
the installation boot prompt, type:
linux mediacheck
The installation program prompts you to insert a CD or select an ISO image to test, and select
OK
to perform the checksum operation. This checksum operation can be performed on any Red Hat
Enterprise Linux CD and does not have to be performed in a specific order (for example, CD #1
does not have to be the first CD you verify). It is strongly recommended to perform this operation on
any Red Hat Enterprise Linux CD that was created from downloaded ISO images. This command
works with the CD, DVD, hard drive ISO, and NFS ISO installation methods.
• Also in the
images/
directory is the
boot.iso
file. This file is an ISO image than can be used
to boot the installation program. To use the
boot.iso
, your computer must be able to boot from
its CD-ROM drive, and its BIOS settings must be configured to do so. You must then burn the
boot.iso
file onto a recordable/rewriteable CD-ROM.
• If you need to perform the installation in
serial mode
, type the following command:
linux console= <device>
For text mode installations, use:
linux text console= <device>
In the above command,
<device>
should be the device you are using (such as ttyS0 or ttyS1). For
example,
linux text console=ttyS0
.
Text mode installations using a serial terminal work best when the terminal supports UTF-8. Under
UNIX and Linux, Kermit supports UTF-8. For Windows, Kermit '95 works well. Non-UTF-8 capable
terminals works as long as only English is used during the installation process. An enhanced
serial display can be used by passing the
utf8
command as a boot-time option to the installation
program. For example:
linux console=ttyS0 utf8