Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 325 / 388

Kickstart Options
307
interactive
(optional)
Uses the information provided in the kickstart file during the installation, but allow for inspection
and modification of the values given. You are presented with each screen of the installation
program with the values from the kickstart file. Either accept the values by clicking
Next
or change
the values and click
Next
to continue. Refer to the
autostep
command.
iscsi
(optional)
iscsi --ipaddr= [options].
Specifies additional iSCSI storage to be attached during installation. If you use the
iscsi
parameter, you must also assign a name to the iSCSI node, using the
iscsiname
parameter. The
iscsiname
parameter must appear before the
iscsi
parameter in the kickstart file.
We recommend that wherever possible you configure iSCSI storage in the system BIOS or
firmware (iBFT for Intel systems) rather than use the
iscsi
parameter.
Anaconda
automatically
detects and uses disks configured in BIOS or firmware and no special configuration is necessary
in the kickstart file.
If you must use the
iscsi
parameter, ensure that networking is activated at the beginning of the
installation, and that the
iscsi
parameter appears in the kickstart file before you refer to iSCSI
disks with parameters such as
clearpart
or
ignoredisk
.
•
--port=
(mandatory) — the port number (typically,
--port=3260
)
•
--user=
— the username required to authenticate with the target
•
--password=
— the password that corresponds with the username specified for the target
•
--reverse-user=
— the username required to authenticate with the initiator from a target that
uses reverse CHAP authentication
•
--reverse-password=
— the password that corresponds with the username specified for the
initiator
iscsiname
(optional)
Assigns a name to an iSCSI node specified by the iscsi parameter. If you use the
iscsi
parameter in your kickstart file, this parameter is mandatory, and you must specify
iscsiname
in
the kickstart file before you specify
iscsi
.
key
(optional)
Specify an installation key, which is needed to aid in package selection and identify your system
for support purposes.
•
--skip
— Skip entering a key. Usually if the key command is not given, anaconda will pause at
this step to prompt for a key. This option allows automated installation to continue if you do not
have a key or do not want to provide one.
keyboard
(required)
Sets system keyboard type. Here is the list of available keyboards on i386, Itanium, and Alpha
machines:
be­latin1, bg, br­abnt2, cf, cz­lat2, cz­us­qwertz, de, de­latin1,
de­latin1­nodeadkeys, dk, dk­latin1, dvorak, es, et, fi, fi­latin1,
fr, fr­latin0, fr­latin1, fr­pc, fr_CH, fr_CH­latin1, gr, hu, hu101,