Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 171 / 388

Preparing to use a driver update image file
153
13.2.1. Preparing to use a driver update image file
13.2.1.1. Preparing to use an image file on local storage
To make the ISO image file available on local storage, such as a USB flash drive, USB hard drive, or
local IDE hard drive, simply copy the file onto the storage device. You can rename the file if you find
it helpful to do so, but you must not change the filename extension, which must remain
.iso
. In the
following example, the file is named
dd.iso
:
Figure 13.1. Content of a USB flash drive holding a driver update image file
Note that if you use this method, the storage device will contain only a single file. This differs from
driver update disks on formats such as CD and DVD, which contain many files. The ISO image file
contains all of the files that would normally be on a driver update disk.
Refer to
Section 13.3.2, “Let the installer prompt you for a driver update”
and
Section 13.3.3, “Use
a boot option to specify a driver update disk”
to learn how to use the driver update disk during
installation.
If you change the file system label of the device to
OEMDRV
, the installation program will automatically
examine it for driver updates and load any that it detects. This behavior is controlled by the
dlabel=on
boot option, which is enabled by default. Refer to
Section 13.3.1, “Let the installer
automatically find a driver update disk”
.
13.2.1.2. Preparing to use an image file available through a network
To make the ISO image file available on a local network, place it in a publicly accessible folder on a
HTTP, FTP, or NFS server. If you plan to use an image file that is already publicly available through the
Internet, no special preparation is necessary. In either case, take note of the URL and verify that you
can access the file from another machine on your network before commencing installation.