Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 179 / 388

Specifying the location of a driver update image file or driver update disk
161
pxelinux/pxelinux.cfg/default
file on your PXE server, type
r5su3-dd
at the prompt
and press
Enter
.
Refer to
Section 13.2.3, “Preparing an initial RAM disk update”
and
Chapter 34, PXE Network
Installations
for instructions on using PXE to perform an update during installation. Note that this is an
advanced procedure — do not attempt it unless other methods of performing a driver update fail.
13.4. Specifying the location of a driver update image file or
driver update disk
If the installer detects more than one possible device that could hold a driver update, it prompts you
to select the correct device. If you are not sure which option represents the device on which the driver
update is stored, try the various options in order until you find the correct one.
Figure 13.7. Selecting a driver disk source
If the device that you choose contains no suitable update media, the installer will prompt you to make
another choice.
If you made a driver update disk on floppy disk, CD, DVD, or USB storage device, the installer now
loads the driver update. However, if the device that you selected is a type of device that could contain
more than one partition (whether the device currently has more than one partition or not), the installer
might prompt you to select the partition that holds the driver update.