Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 336 / 388

Chapter 31. Kickstart Installations
318
•
--password=
— Set a password which must be provided to connect to the VNC session. This
is optional, but recommended.
volgroup
(optional)
Use to create a Logical Volume Management (LVM) group with the syntax:
volgroup <name> <partition> <options>
The options are as follows:
•
--noformat
— Use an existing volume group and do not format it.
•
--useexisting
— Use an existing volume group and reformat it.
•
--pesize=
— Set the size of the physical extents.
Create the partition first, create the logical volume group, and then create the logical volume. For
example:
part pv.01 ­­­size 3000
volgroup myvg pv.01
logvol ­/ ­­­vgname=myvg ­­­size=2000 ­­­name=rootvol
For a detailed example of
volgroup
in action, refer to
Section 31.4.1, “Advanced Partitioning
Example”
.
xconfig
(optional)
Configures the X Window System. If this option is not given, the user must configure X manually
during the installation, if X was installed; this option should not be used if X is not installed on the
final system.
•
--driver
— Specify the X driver to use for the video hardware.
•
--videoram=
— Specifies the amount of video RAM the video card has.
•
--defaultdesktop=
— Specify either GNOME or KDE to set the default desktop (assumes
that GNOME Desktop Environment and/or KDE Desktop Environment has been installed
through
%packages
).
•
--startxonboot
— Use a graphical login on the installed system.
•
--resolution=
— Specify the default resolution for the X Window System on the installed
system. Valid values are 640x480, 800x600, 1024x768, 1152x864, 1280x1024, 1400x1050,
1600x1200. Be sure to specify a resolution that is compatible with the video card and monitor.
•
--depth=
— Specify the default color depth for the X Window System on the installed system.
Valid values are 8, 16, 24, and 32. Be sure to specify a color depth that is compatible with the
video card and monitor.
zerombr
(optional)
If
zerombr
is specified any invalid partition tables found on disks are initialized. This destroys all
of the contents of disks with invalid partition tables.
Note that this command was previously specified as
zerombr yes
. This form is now deprecated;
you should now simply specify
zerombr
in your kickstart file instead.