Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 344 / 388

Chapter 31. Kickstart Installations
326
debug
Start up pdb immediately.
dd
Use a driver disk.
dhcpclass= <class>
Sends a custom DHCP vendor class identifier. ISC's dhcpcd can inspect this value using "option
vendor-class-identifier".
dns= <dns>
Comma separated list of nameservers to use for a network installation.
driverdisk
Same as 'dd'.
expert
Turns on special features:
• allows partitioning of removable media
• prompts for a driver disk
gateway= <gw>
Gateway to use for a network installation.
graphical
Force graphical install. Required to have ftp/http use GUI.
isa
Prompt user for ISA devices configuration.
ip= <ip>
IP to use for a network installation, use 'dhcp' for DHCP.
keymap= <keymap>
Keyboard layout to use. Valid values are those which can be used for the 'keyboard' kickstart
command.
ks=nfs: <server> :/ <path>
The installation program looks for the kickstart file on the NFS server
<server>
, as file
<path>
.
The installation program uses DHCP to configure the Ethernet card. For example, if your NFS
server is server.example.com and the kickstart file is in the NFS share
/mydir/ks.cfg
, the
correct boot command would be
ks=nfs:server.example.com:/mydir/ks.cfg
.
ks=http:// <server> / <path>
The installation program looks for the kickstart file on the HTTP server
<server>
, as file
<path>
.
The installation program uses DHCP to configure the Ethernet card. For example, if your HTTP
server is server.example.com and the kickstart file is in the HTTP directory
/mydir/ks.cfg
, the
correct boot command would be
ks=http://server.example.com/mydir/ks.cfg
.
ks=floppy
The installation program looks for the file
ks.cfg
on a vfat or ext2 file system on the diskette in
/
dev/fd0
.