Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER ADMINISTRATION, Руководство по установке

Страница: 167 / 388

Installing Packages
149
12.25. Installing Packages
At this point there is nothing left for you to do until all the packages have been installed. How quickly
this happens depends on the number of packages you have selected and your computer's speed.
12.26. Installation Complete
Congratulations! Your Red Hat Enterprise Linux installation is now complete!
The installation program prompts you to prepare your system for reboot.
IBM eServer System p and System i — Completing the Installation
Do not forget to remove any boot media.
After rebooting, you must set the open firmware boot device to the disk containing your Red Hat
Enterprise Linux PReP and / partitions. To accomplish this, wait until the LED indicator or HMC
SRC says
E1F1
, then press
1
to enter the System Management Services GUI. Click on
Select
Boot Options
. Select
Select Boot Devices
. Select
Configure 1st Boot Device
. Select the disk
containing Red Hat Enterprise Linux. Set the other devices as you wish. Then exit the SMS menus
to boot your new system.
Note
Steps in the SMS menu may be different depending on the machine model.
After your computer's normal power-up sequence has completed, YABOOT's prompt appears, at
which you can do any of the following things:
• Press
Enter
— causes YABOOT's default boot entry to be booted.
• Select a boot label, followed by
Enter
— causes YABOOT to boot the operating system
corresponding to the boot label. (Press
Tab
for non-System i systems at the
boot:
prompt for a
list of valid boot labels.)
• Do nothing — after YABOOT's timeout period, (by default, five seconds) YABOOT automatically
boots the default boot entry.
Once Red Hat Enterprise Linux has booted, one or more screens of messages should scroll by.
Eventually, a
login:
prompt or a GUI login screen (if you installed the X Window System and
chose to start X automatically) appears.
The first time you start your Red Hat Enterprise Linux system in run level 5 (the graphical run level),
the
Setup Agent
is presented, which guides you through the Red Hat Enterprise Linux configuration.
Using this tool, you can set your system time and date, install software, register your machine with
Red Hat Network, and more. The
Setup Agent
lets you configure your environment at the beginning,
so that you can get started using your Red Hat Enterprise Linux system quickly.
For information on registering your Red Hat Enterprise Linux subscription, refer to
Chapter 25,
Activate Your Subscription
.