REA
VERIFIER
© REA Elektronik GmbH, 64367 Mühltal, Germany --- REA MLV-2D Manual Version 3 – 21/12/2015
Page 63 of 98
9.10.1
Onscreen verification report
The verification result is displayed on the device and in TransWin32 simultaneously.
9.10.2
Quick display with LED "traffic lights"
A system of LED traffic lights and an audible signal
for grading the overall result – green indicating a
pass and red indicating errors – is output directly at
the verifier head.
9.10.3
Audible signalling using beeps
A built-in beeper sounds once for a good result and multiple times if the measurement
result has produced a fail.
9.10.4
Onscreen display of verification results on the MLV-2D
Key details from the results are also shown onscreen on the
MLV-2D verifier head, using a sequence of eight screen pages.
The arrow keys scroll page by page through the screens.
9.10.4.1
Results screens
The information
Fail 0.0 (D)
presents a
summary of the last measurement performed.
The
result includes all of the ISO/IEC 15415
verification parameters. Other
"optional
parameters"
are only included in the result as
well if they have been enabled in the device
settings.
The
SRP grade
(
here 0.0 (D)
) of the
measurement result obtained is compared with the
predefined
"Selected grade
" (
here 1.5 (C)
). If
the target grade has been achieved or exceeded,
the result is a "
Pass
". If the result falls short of
the target value, the result is a "
Fail
".
