Raven SmarTrax MD, Калибровка и руководство по эксплуатации

Страница: 15 / 136

CHAPTER
3
P/N 016-5030-020 Rev. D 9
CHAPTER 3
VIPER 4
WIDGET AND BUTTON DEFINITIONS
The following are common status or mode and navigation icons which may be visible while the SmarTrax MD
system is installed:
Display Message
The SmarTrax node is detected, but the operator must accept
responsibility for the operation of the SmarTrax MD system.
The SmarTrax MD system cannot be engaged because the
vehicle is traveling too fast or too slow or no A-B path or
guidance line has been set.
SmarTrax is detected, turned on, calibrated, and ready to be
engaged.
SmarTrax is detected and in operation in the Online Sensitivity
or Line Acquisition Aggressiveness mode. Adjusting the OL
Sensitivity or LA Aggressiveness will affect performance while
in this mode. Press and hold to determine in which mode the
system is operating.
Vehicle speed is too fast or too slow for SmarTrax operation
and the system will disengage.
Previous - Returns the Viper 4 display to the previous screen in
the setup process.
Next - Saves the changes made to the SmarTrax system and
proceeds to the next step in the setup process.