Raritan CCA-0N-V5.1-E, Руководство администратора

Страница: 55 / 420

Chapter 4: Configuring CC-SG with Guided Setup
37
3. There are two ways to add devices to a group, Select Devices and
Describe Devices. The Select Devices tab allows you to select which
devices you want to assign to the group by selecting them from the
list of available devices. The Describe Devices tab allows you to
specify rules that describe devices, and the devices whose
parameters follow those rules will be added to the group.

Select Devices
a. Click the Select Devices tab in the Device Group: New panel.
b. In the Available list, select the device you want to add to the
group, and then click Add to move the device into the Selected
list. Devices in the Selected list will be added to the group.
c. To remove a device from the group, select the device name in
the Selected list, and then click Remove.
d. You can search for a device in either the Available or Selected
list. Type the search terms in the field below the list, and then
click Go.

Describe Devices
a. Click the Describe Devices tab in the Device Group: New panel.
In the Describe Devices tab, you create a table of rules that
describe the devices you want to assign to the group.
b. Click the Add New Row icon to add a row to the table.
c. Double-click the cell created for each column to activate a
drop-down menu. Select the rule components you want to use
from each list.
4. Select the Create Full Access Policy for Group checkbox if you want
to create a policy for this device group that allows access to all
nodes and devices in the group at all times with control permission.
5. To add another device group, click Apply to save this group and
repeat these steps. Optional.
6. When you have finished adding device groups, click OK. The Node
Group: New panel opens. You can also click Create Groups, and
then click Add Node Groups in the Guided Tasks tree view in the left
panel to open the Node Group: New panel.
7. In the Group Name field, type a name for a node group you want to
create.
8. There are two ways to add nodes to a group, Select Nodes and
Describe Nodes. The Select Nodes section allows you to select
which nodes you want to assign to the group by selecting them from
the list of available nodes. The Describe Nodes section allows you to
specify rules that describe nodes, and the nodes whose parameters
follow those rules will be added to the group.