Chapter 5 Getting Information
Using Advanced Reporting
Scalar i500 User’s Guide
156
• Attribute — Specifies which values are included in the report. Select
one of the following:
• Data Written/Read (default) — the amount of data written to
and read from each tape drive, shown separately in the chart.
• Total Read and Write — the combined total amount of data
written to and read from each tape drive.
• Mount Count — the number of tape cartridge mounts.
• Media Mount Time — the total amount of time a tape cartridge
spent in the selected drive(s).
• Media Motion Time — the total amount of time the media spent
in motion while in the tape drive (writing, reading, rewinding,
etc.).
• Chart — How the data is displayed in the chart. Select Area, Bar
(default), Line, or Pie.
• Type — The chart type. Select one of the following:
• Rollup (default) — Displays the Grouping on the x-axis and the
Attribute amount on the y-axis.
• Trend — Shows how the Attribute amount changes over time for
the selected Grouping.
• Grouping — specifies which tape drive(s) or partition(s) to include in
the report. Select one of the following:
• All Drives by Coordinate (default) — Presents the sum total of
the selected attribute for all tape drives according to their
location in the library. If more than one tape drive resided in that
location during the selected range, then the attribute values for
all the tape drives that resided in that location are combined in
the chart.
• All Drives by Physical SN — Presents the sum total of the
selected attribute for all drives according to the physical tape
drive serial number.
• All Partitions — Presents a comparison of all drives grouped by
partition in the physical library.
