Chapter 3 Configuring Your Library
Configuring Operator Panel Display Settings
Scalar i500 User’s Guide
120
•
Enable SSL
— Allows you to enable Secure Socket Layer (SSL) for
secure data transmission between the library and remote clients. This
option is disabled by default.
•
Enable SNMP V1/V2
— Allows you to enable or disable support for
Simple Network Management Protocol (SNMP) V1 and V2c. This
option is disabled by default.
•
Enable IPv6
— Allows you to enable or disable support for IPv6
addresses. This option is disabled by default.
•
Enable SMI-S
— Allows you to enable or disable SMI-S running on
the library. This setting is disabled by default.
Details on the system settings include:
• Users can configure only the
Touch screen audio
setting.
• Administrative users can configure all the settings on the
System
Settings
screen.
You cannot configure the system settings from the web client.The path to
open the appropriate screen is as follows:
• From the operator panel, select
Tools > System Settings
.
Configuring Operator Panel Display Settings
You can use the operator panel
Display Settings
screen to adjust the
operator panel’s brightness and contrast settings. The current applied
settings appear on the screen. Adjust the brightness and contrast settings
Note:
SNMP v3 is always enabled. For more information on
SNMP, see
Configuring SNMP Settings on the Library
on
page 57.
Note:
This setting differs from enabling/disabling the SMI-S
port in the
Tools > Security
menu (see
Configuring Library
Security Settings
on page 117).