Chapter 3 Configuring Your Library
Adding or Upgrading Licensable Features
Scalar i500 User’s Guide
83
6
Click
Submit
.
If you have entered a valid serial number, the website displays
existing license keys for this feature. Exception: If the license was
applied at the factory, the word “
Factory
” may appear instead of the
actual license key. If you need to retrieve the license key in this case,
contact Quantum Technical Support (see
Contacts
on page 7).
7
Type the authorization code from your License Key Certificate in the
Authorization Code
text box.
8
Click the
Get License Key
button.
If you have entered a valid authorization code, the website allows
you to retrieve the license key for your new feature or upgrade.
You are now ready to apply the license key to the library. See
Applying a
License Key
.
Applying a License Key
3
A license key may be applied to the library during the initial
configuration or whenever licensed features are purchased. If an
additional feature is purchased, the new license key will replace the
current license key.
You can enter the license key on the
Setup Wizard: Licensing
screen, and
you can also use commands on the operator panel or web client to
directly enter a license key at any time after exiting the Setup Wizard.
The paths to open the appropriate screens are as follows:
• From the web client, select
Setup > License
.
• From the operator panel, select
Setup > Licenses
.
Note:
This operation should not be performed concurrently by
multiple administrative users logged in from different
locations. You can access the screen, but you cannot apply
changes while another administrative user is performing the
same operation.
Caution:
While you are installing a license key, backup operations
may be interrupted.