Chapter 3 Configuring Your Library
Setting the Date, Time, and Time Zone
Scalar i500 User’s Guide
100
Setting the Date, Time, and Time Zone
Administrative users can either set the library date, time, and time zone
settings manually or configure the Network Time Protocol (NTP).
Setting the Date and Time
Manually
3
The
Setup Wizard - Date & Time
screen allows you to set the date and time
for the library. You can also access the date and time setup screen by
selecting
Date & Time
from the
Setup
menu on either the operator panel or
the web client.
Date and time settings are used to log the date and time events take place
and to set the time for automatic backup and restore functions. At a
minimum, you should set the library’s date and time as part of the initial
library configuration.
The time is set to a 24 hour clock. For example, four o’clock in the
afternoon is entered as 16:00.
Note:
The following operations should not be performed
concurrently by multiple administrative users logged in from
different locations. You can access the appropriate screens, but
you cannot apply changes while another administrative user is
performing the same operation.
Note:
For step-by-step date and time configuration instructions, see
your library’s online Help. To access the online Help system,
click the
Help
icon at the top right of the web client or operator
panel user interface.
