Chapter 1 Description
Licensable Features
Scalar i500 User’s Guide
32
The Q-EKM license corresponds to the size of your library. If you
purchase Q-EKM for a particular size library and later expand the library,
you must purchase an additional Q-EKM license at that time. Your new
license key contains the entire license corresponding to your expanded
library size. The new license key replaces your current license key.
Table 2
describes the licenses available for the different library
configurations.
Table 2 Q-EKM License
Configurations
Advanced Reporting
1
Advanced Reporting provides the following reports that you can
configure for viewing and analysis:
•
Drive Resource Utilization Report
—Provides tape drive usage
information, showing you which tape drives are working at optimum
capacity and which are under-utilized. This can help you allocate
your tape drive resources properly.
•
Media Integrity Analysis Report
—Provides TapeAlert count for
various combinations of tape drives, tape cartridges, and TapeAlert
flags. This can help you determine if a problem is due to a specific
tape drive or tape cartridge.
For information on how to use the advanced reporting capabilities, see
Using Advanced Reporting
on page 154.
The Advanced Reporting license applies to your entire library, regardless
of library size. This means you only need to purchase the license once. If
you increase the size of your library, your existing license applies to your
new library configuration.
5U
14U
23U
32U
41U
Default Licensed
0
0
0
0
0
License Capacity
5U license
14U license
23U license
23U license
plus one 9U
license
23U license
plus two 9U
licenses
Maximum Number of
Drives licensed for Q-EKM
2 6 10 14 18