background image

8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE Rev. A

7/3/14

© Copyright 2014, Sunex Tools

®

Read  and  follow  all  instructions  in  User's  Manual.  •  Do  not  load 
carts beyond rated capacity (350 lbs.). • Lock lid and drawers before  
moving.  • Apply  brake  on  locking  casters  anytime  cart  is  in  place. 
• Units  can  tip  or  fall  causing  damage  or  personal  injury.  •  Cart  is
designed to roll easily on flat surfaces and should not be used on  
uneven  or  inclined  surfaces.  •  Do  not  open  more  than  one  
loaded drawer at a time. •Do not stand on or step in drawers. • Keep  
children  away  from  unit.  •  Wear  gloves  when  lifting  edges.  •  This 
product  may  contain  one  or  more  chemicals  known  to  the  State  of  
California  to  cause  cancer  and  birth  defects  or  other  reproductive 
harm. 

Wash hands thoroughly after handling. 

• Failure to heed these 

warnings may result in personal injury and/or property damage.

WARNING

Chrome Legs (2)
(With Inserts Installed)

Keys 
(Attached 
to Legs)

Locking Casters (2)

Non-Locking Casters (2)

Locking Drawer Assembly

Bottom Tray

Pry Bar Holder

Side Work Bench

Rubber Mallet

Table or Workbench

6mm Wrench

Phillips Head

Screwdriver

2 People

Long Drawer Handle (1)

Drawer Handle 
Screws (14)

Short Drawer Handles (4)

TOOLS NEEDED

Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel 

read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact 

and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact 

Sunex Tools

®

 for replacements. If the operator is not fluent in English, the product and safety instructions shall be 

read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, 

making sure that the operator comprehends its contents.

Examine box contents, then proceed with following instructions.

M6x42 Bolts,  
Nuts, & Washers 
(8 Pcs. Each)

OPERATING MANUAL

PARTS LIST

MODEL 8013ADELUXE, 8013ABKDELUXE, 

8013ABLDELUXE Rev. A SERVICE CART  

WITH LOCKING TOP & DRAWERS

INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH

GUARANTEED TO PERFORM

Summary of Contents for 8013ADELUXE

Page 1: ...2 Locking Drawer Assembly Bottom Tray Pry Bar Holder Side Work Bench Rubber Mallet Table or Workbench 6mm Wrench Phillips Head Screwdriver 2 People Long Drawer Handle 1 Drawer Handle Screws 14 Short Drawer Handles 4 TOOLS NEEDED Read and follow all instructions in User s Manual It is the responsibility of the owner to make sure all personnel read this manual prior to using the device It is also th...

Page 2: ...ories Pry Bar Holder or Side Work Bench Figure 2 shows Pry Bar Holder for attachment to the overhanging end of the service cart Align the outermost bolt holes in the accessory with the bolt holes in the end of the cart and with the uppermost holes in the chrome legs Position a washer and insert a 6mm bolt through the washer bolt holes and legs as shown Secure bolts with a flat washer lock washer a...

Page 3: ...ottom drawer so that the channel in the handle covers all six holes in the front of the drawer Insert screws through each hole from inside the drawer and into the drawer handle channel Tighten the screws Repeat for all remaining drawers using short handles Do not allow the handles to over hang the ends of the drawer faces as they will interfere with the operation of the drawer Step 6 Attaching cas...

Page 4: ...r Handle RS8006HDLS Handle Screws Set of 6 RSRBSLIDEC2 Clip On Roller Bearing Slide pr 8045RSLD Red Replacement Small Left Drawer without Slides 8045BKSLD Black Replacement Small Left Drawer without Slides 8045BLSLD Blue Replacement Small Left Drawer without Slides 8045RSRD Red Replacement Small Right Drawer without Slides 8045BKSRD Black Replacement Small Right Drawer without Slides 8045BLSRD Blu...

Reviews: