Polycom®, Inc.
728
Appendix G - Configuring Direct
Connections to the Collaboration Server
Direct connection to the Collaboration Server is necessary if you want to:
●
Modify the Collaboration Server’s
Factory Default Management Network
settings without using the
USB memory stick.
●
Connect to the Collaboration Server’s
Alternate Management Network
for support purposes.
●
Connect to the Collaboration Server via a modem.
Management Network (Primary)
If you do not want to use the USB memory stick method of modifying the Collaboration Server’s
Management Network
parameters, it is necessary to establish a direct connection between a workstation
and the Collaboration Server.
Configuring the Workstation
The following procedures show how to modify the workstation’s networking parameters using the
Windows
New Connection Wizard
.
For non-Windows operating systems an equivalent procedure must be performed by the system
administrator.
Before connecting directly, you must modify the
IP Address
,
Subnet Mask
and
Default Gateway
settings of
the workstation to be compatible with either the Collaboration Server’s
Default Management Network
or
Alternate Management Network
.
To modify the workstation’s IP addresses:
1
On the Windows
Start
menu, select
Settings
>
Network Connections.
2
In the
Network Connections
window, double-click the
Local Area Connection
that has
Connected
status.
Содержание RealPresence 800s
Страница 49: ...RealPresence Collaboration Server RMX 800s Virtual Edition Administrator s Guide Polycom Inc 63 3 Click OK ...
Страница 103: ...RealPresence Collaboration Server RMX 800s Virtual Edition Administrator s Guide Polycom Inc 117 12 Click the IVR tab ...
Страница 215: ...RealPresence Collaboration Server RMX 800s Virtual Edition Administrator s Guide Polycom Inc 229 ...
