Polycom RealPresence 800s Скачать руководство пользователя страница 147

Страница: 147 / 867

RealPresence Collaboration Server (RMX) 800s/Virtual Edition Administrator’s Guide

Polycom®, Inc.

161

●

When Multiple Content Resolutions is enabled, the

Send Content to Legacy Endpoints

option is

selected and cannot be deselected.

●

Additional resources are allocated to the conference (in addition to the resources occupied by the

conference participants) for processing the content:



Resources are allocated only when content sharing is started.



If only HD720p30 content is provided, 1.5 HD video resources are allocated to the conference.



If HD1080p15 is provided, 2 HD video resources are allocated to the conference.

●

Optionally, content can be sent at multiple resolutions to H.263 endpoints and H.264 endpoints whose

resolution is lower than HD and support H.263 content. In this case an additional resource is

allocated.

●

Optionally, content can be sent to cascaded RealPresence Collaboration Servers.



An additional resource is allocated to the conference, based on the content resolution selected.

The resolution sent is set in the Conference Profile when H.264 Cascade is selected.



All cascading conferences must be defined with the same content settings (content line rate,

resolution and frame rate).



A link that does not support the content settings cannot receive content.

●

If there are not enough resources available, Multiple Content Resolutions is disabled and the

conference does not include cascading links, content sharing mode reverts to Content Video

Switching mode.
If the conference includes cascading links, and the conference is set to H.264 Cascade and SVC

Optimized:



H.264-capable endpoints will share content using these settings.



H.263-capable endpoints will not share content and will receive the content over the video

(people) channel.



If H.264 Cascade was not selected for the conference, the H.264 HD protocol will be used.

●

H.264 endpoints that are not HD capable and do not support H.263 will receive content over the video

(people) channel.

●

TIP endpoints are not supported. Content will be displayed over the video (people) channel.

Содержание RealPresence 800s




































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание RealPresence 800s

Отзывы:

Похожие инструкции для RealPresence 800s

Бренды по названию

Популярные бренды

Polycom RealPresence 800s, Руководство администратора

Результаты поиска

Содержание RealPresence 800s

Отзывы:

Похожие инструкции для RealPresence 800s

Бренды по названию

Популярные бренды