Perkins New 1000 Series, Руководство по ремонту, Страница: 283 / 290

Workshop Manual, TPD 1350, issue 3 283
24
New 1000 Series
Exhauster
To remove and to fit 24-5
To remove
1 Disconnect the lubricating oil and vacuum pipes
from the exhauster and fit covers to the open ends of
the pipes.
2 Release the setscrews and remove the exhauster.
To fit
1 Ensure that the joint faces of the exhauster and the
timing case are clean and renew the joint. Fit the
exhauster to the timing case and tighten the
setscrews.
2 Remove the covers from the open ends of the pipes
and connect the oil pipe and the vacuum pipe to the
exhauster.
Purchased from www.WorkshopManuals.co.uk