Perkins New 1000 Series, Руководство по ремонту, Страница: 101 / 290

Workshop Manual, TPD 1350, issue 3 101
14
New 1000 Series
To inspect 14-14
1 Clean all the components before inspection.
2 Check the gear teeth and the splines of the drive
shaft for wear or other damage. Renew the drive shaft
if necessary.
3 Check the idler gear, needle roller bearing, hub and
thrust washer for wear or other damage. Renew the
components if necessary.
4 Check the drive gear for the balance weights for
wear or other damage. Renew the gear if necessary.
5 Check the balance weights for wear or other
damage. If either balance weight is worn or damaged,
both balance weights must be renewed.
6 Check the needle roller bearings for the drive shaft
for wear or other damage. Renew the bearings
, see
operation 14-15 , if necessary.
7 Check the bushes for the balance weights for wear
or other damage. Renew the bushes
, see operation
14-16 , if necessary.
8 To inspect the lubricating oil pump, see operation
19-8 .
Purchased from www.WorkshopManuals.co.uk