2-57
VU-ACD™/100 Maintenance Guide – Host/DOS
Maintenance Utilities
2.6.3.4
Change Default Tape Drive
?
Change Default Tape Drive should only be used when more than one tape drive is
configured on this host platform. This option does not alter the tape parameters entered
for the selected tape drive. The default tape drive becomes accessible via VU-ACD/100
tape utilities. A system reboot is not required
?
The Compaq TurboDAT Autoloader with SCO ARCserve/Open software is optional. For
additional information on this option, contact Perimeter Technology Sales.
Step
Prompt
Action
1
SYSTEM HARDWARE CONFIGURATION
1) Node Configuration
2) Maintenance Modem Configuration
3) Tape Configuration
4) Multiport Serial I/O Configuration
5) System Printer Configuration
6) Reset All External Displays
Select an option or ‘q’ to quit:
Type
3
and press
Enter
to select Tape
Configuration.
2
Enter the backup device’s raw name
[default: rct0]:->/dev/
Type the raw cartridge device name of the tape
backup unit and press
Enter
. Or, simply press
Enter
to accept the default name.
3
Enter the backup device’s cooked name
[default: xct0]:->/dev/
Type the cooked cartridge device name of the
tape backup unit and press
Enter
. Or, simply
press
Enter
to accept the default name.
?
The message shown as Step 4A only appears on systems configured with a Compaq
TurboDAT Autoloader option that has been previously set as the default drive for
VU-ACD/100 Data Management operations.
4A
The Auto Changer is currently configured as the default drive
for VU-ACD/100 Data Management operations
?
The message shown as Step 4B only appears on systems configured with a Compaq
TurboDAT Autoloader that has not been previously set as the default drive for
VU-ACD/100 Data Management operations.
4B
The Auto Changer is NOT currently configured as the default
drive for VU-ACD/100 Data Management operations
4C
Do you want to use the Auto Changer as the default drive for
VU-ACD/100 Data Management operations ? (y/n)
Type
Y
and press
Enter
to enable the Compaq
TurboDAT Autoloader for VU-ACD/100 Data
Management operations. Proceed to Step 5.
Otherwise, type
N
and press
Enter
to disable
the Compaq TurboDAT Autoloader. Proceed
to Step 6.
