manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Руководство по обслуживанию

Поделиться
Скачать
Perimeter Technology VU-ACD /100 Скачать руководство пользователя страница 30

2-12

Maintenance Utilities

VU-ACD™/100 Maintenance Guide – Host/DOS

2.2.2

Complete System Restore

This menu option copies and overwrites all VU-ACD/100 files from a tape cartridge to the host hard
disk.  Use this function only to recover from a hard disk crash.  After a restoration the hard disk data
reverts to the date and time of the data stored on the automatic nightly backup or from a Complete
System Backup cartridge tape.

!!

PERFORMING A COMPLETE SYSTEM RESTORE REQUIRES SHUTTING
DOWN ACD MIS PROCESSES. INCOMING DATA WILL BE LOST DURING
THE SHUTDOWN PERIOD.

!

Do not perform a restore unless absolutely certain of the integrity of the
data on the tape cartridge. As a safety precaution, perform a hard disk
backup onto another tape cartridge immediately before the restore.

Step

Prompt

Action

1

TAPE BACKUP/RESTORE UTILITIES

1) Complete System Backup
2) Complete System Restore
3) List of Contents on Tape
4) Extract Specific files from Tape

Select an option or enter q to quit:

Type 

2

 and press 

Enter

 to select Complete

System Restore.

2

                      Complete System Restore (from tape)

This selection is used to perform a Complete Restore of
the ACD MIS from a Complete Back-up or automatic nightly
back-up tape.  The Complete Restore option should not be
executed while the ACD MIS processes are running.

Please note this selection will completely write over existing
data on the hard disk.

Do you want to continue? (y/n):

Type 

y

 and press 

Enter

 to continue (or 

n

 and

press 

Enter

 to return to Tape Backup/Restore

Utilities Menu).

?

Step 3 appears if the ACD MIS is running when the Complete System Restore function

is selected.

3

The ACD MIS processes are running
The ACD MIS processes will be shut down to perform the selected tape function

Do you want to continue? (y/n)

Type 

y

 and press 

Enter

 to shut down ACD

MIS processes and continue with the Complete
Restore function.

Note: Disregard the ACD MIS screen if it appears during the shutdown process.

The selected tape function will resume after the ACD MIS shutdown is completed.

                        (this could take a few minutes)

Press <ENTER> to continue

Press 

Enter

.

System shutdown in progress...please
wait

ACD MIS processes have been
shutdown to perform the selected
function.

Press <ENTER>to continue

CAUTION

:  All data collection will cease

while the system is shut down.

Press 

Enter

.  Proceed to Step 4.

Содержание VU-ACD /100

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды