2-11
VU-ACD™/100 Maintenance Guide – Host/DOS Maintenance Utilities
Step Prompt Action
4
Complete System Backup (to tape)
This selection is used to perform a Complete Backup of the
ACD MIS to tape.
Please note this selection will completely write over existing
data on the tape.
Do you want to continue (y/n): Type
y
and press
Enter
to continue (or
n
and
press
Enter
to return to the Tape Backup/-
Restore Utilities Menu).
5
Insert a tape in the tape drive
Press <ENTER> to continue.
checking tape device....please wait....
(files are listed on the screen as
they are copied)
Insert a non-write-protected cartridge
in the tape drive. Press
Enter
.
The backup will proceed for several minutes
during which time the tape drive will cycle.
6
Press <ENTER> to continue ACD MIS files have been written to tape.
Press
Enter
to redisplay the Tape Backup/-
Restore Utilities Menu.
7
TAPE BACKUP/RESTORE UTILITIES
1) Complete System Backup
2) Complete System Restore
3) List of Contents on Tape
4) Extract Specific files from Tape
Select an option or enter q to quit:
Type
q
and press
Enter
to return to the Mainte-
nance Utilities Menu.
8
MAINTENANCE MENU
1) Shut Down ACD MIS
2) Shut Down ACD MIS & UNIX System
3) Tape Backup/Restore Utilities
4) System Logs
5) Load Management Limits
6) Change Maintenance Logon Password
7) System Hardware Configuration
8) Install a Software Update
9) Request Switch Initialization
10) 5ESS Provisioning
11) List Logged-In Users
Select an option, or enter q to quit:
Type
2
and press
Enter
to select Shut Down
ACD MIS. & UNIX Refer to Section 2.1.2.2
for additional information on the shutdown
process.
9
** Safe to power off **
-or-
** Press any key to reboot ** To restart the ACD MIS, press
Enter
to initiate
a reboot.
